Chemical Industry Ultrasonic Cleaning Tank
Why Pharmaceutical Equipment need ultrasonic cleaner? Pharmaceutics manufacturers have challenging cleaning requirements when equipment such as pill punches and filling machine valves are used with different materials or when they become...
Large Pharmaceutical Industrial Ultrasonic Cleaner
Why Pharmaceutical Equipment need ultrasonic cleaner?
Pharmaceutics manufacturers have challenging cleaning requirements when equipment such as pill punches and filling machine valves are used with different materials or when they become contaminated with mold or bacteria. Traditional cleaning methods with toxic chemicals bring their own contamination issues, and cleaning by shaking and agitation may not penetrate into inaccessible spaces or hard-to-reach crevices. Industrial ultrasonic cleaners offer an environmentally friendly cleaning solution that removes contaminants thoroughly and quickly at a low operational cost.
Skymen pharmaceutical ultrasonic cleaners provide the safest and most efficient method to effectively clean your manufacturing components.
Our ultrasound equipment is used to remove traces of chemical products, oils, pigments or prints, among other residues.
We remove dirt from complex pieces with cracks, hard accesses or joints without damaging them.
Ultrasound equipment achieves a superior cleanliness and saves time and effort compared to manual washing.
With one tanks for cleaning and another tank for drying
Stainless steel tank has resistance to wear and long work life.
0～95℃ temperature range.
With 2 Stainless steel basket
With filtration system, save detergent, more environmentally friendly
With casters with brake
Use just tab water, or industrial alcohol and solvent cleaner for more higher cleaning requirement
With ultrasonic genrator work separately control transducer
1 year warranty & tech support for life
Tank 1# (Ultrasonic cleaning tank)
Tank 2#(Drying tank)
Available, material: SUS304
1 x Industry Heated Ultrasonic Cleaner Set with 2 tanks(1 x Ultrasonic cleaning tank& 1 x Drying tank)
2 x sus basket
3 x ultrasonic generator
1 x English instruction Manual
How Ultrasonic Cleaning Works?
Pharmaceutical devices and parts to be cleaned have to be detached and placed in the ultrasonic bath. Pill dies, valves, nozzles and hoses are placed in a stainless steel basket and immersed in a tank containing a water-based solution of a mild detergent. When the ultrasonic cleaning system is switched on, there can be a buzzing depending on the frequency used and a slight agitation of the tank liquid can often be observed.
In the liquid bath, the ultrasonic transducer is converting an electrical signal of perhaps 40 kHz into ultrasonic waves that travel through the liquid. Higher frequencies are used for delicate components while lower frequencies, down to about 20 kHz, are used for the powerful cleaning of rugged parts.
As the sound waves travel through the liquid, they produce microscopic cavitation bubbles whose formation and collapse produce the cleaning action. The bubbles loosen any material, down to the original machined or manufactured surface. The loose material floats away and is filtered out.
The sound waves travel through the parts and create bubbles wherever there is liquid. As a result, even threads, cracks and crevices and internal surfaces are cleaned thoroughly via the bubble action. Depending on the frequency and the power of the ultrasonic system, cleaning can take as little time as ten minutes and for even for challenging applications, the ultrasonic cleaning method works more quickly than traditional cleaning.
Skymen Industrial Ultrasonic Cleaners
Industrial ultrasonic cleaners from Skymen can clean pharmaceutical equipment quickly and completely with a low total cost and efficiency.