Tattoo Ultrasonic Cleaner

This model is suitable for labware, medical instrument, PCB, hardware parts cleaning, the ultrasonic power is adjustable from 96W to 240W, it depends on cleaning request, the timer 0-30 minutes setting, heater 20-80 degree celsius setting, it features for excellent and thorough cleaning effect.

Send Inquiry
Product Details

Tattoo Ultrasonic Cleaner

This model is suitable for labware, medical instrument, PCB, hardware parts cleaning, the ultrasonic power is adjustable from 96W to 240W, it depends on cleaning request, the timer 0-30 minutes setting, heater 20-80 degree celsius setting, it features for excellent and thorough cleaning effect.


Specification Details:

Model

JP-040ST

Heater

20~80℃

Ultrasonic   power

240W ( 6pc   transducer)

Voltage

AC   100~120V, 60Hz
AC 220~240V, 50Hz

Frequency

40KHz

Tank size

300*240*150   mm

Housing material

SUS304

Unit size

325*265*280   mm

Tank   material

SUS304

Packing   size

435*360*350mm

Heating   power

200W

N.W.

7.3 Kg

Tank   capacity

10 L

G.W.

8.4 Kg

Timer

Digital 1-30min   adjustable

Certificate

RoHs / CE /   FCC/ PSE/ ISO2008


Features

1. Using advanced digital chips to control temperature and time more accurately;

2. Use ordinary tap water to clean;

3. It can be heated and heated;

4. The cleaning effect is good;

5. Digital LCD can adjust temperature and usage time;

6. All stainless steel casing and cover, liner.


Detail image show:



Cleaning operation process:

1. Add tap water in the cleaning tank. The water level is guaranteed to be higher than or equal to 3/4 of the height of the tank in the cleaning tank. Start electric heating and start ultrasonic to degas. When the water temperature is about 40 degrees, add the specified amount of ultrasonic special cleaning agent. The parts are cleaned when the water temperature reaches 55 to 60 degrees.

2. Adjust the power. Rotate the power adjustment button clockwise to adjust the power level according to the scale.

3. Disassemble the parts you need to clean as much as possible. Use high-pressure water guns, wire brushes, blades or other tools to manually pre-treat the soil, heavy oil and heavy carbon on the surface of the parts to ensure the service life of the cleaning liquid and the speed and effect of cleaning.

4. Put the parts to be cleaned into the cleaning tank, and do not overlap the parts to ensure that the parts are completely submerged by the cleaning fluid.

5. Start the ultrasound. Generally, it is cleaned regularly for 20~30 minutes. After cleaning, turn off the ultrasonic wave and take out the parts for post-processing.

6. The residue on the surface of the component was removed using a high-pressure water gun, and the residue in the tunnel was removed using an air compression gun. Parts that require rust prevention are treated separately. In order to improve the cleaning effect, the cleaning time of the parts in the cleaning liquid can be appropriately extended when time permits. In the actual operation process, in order to improve the cleaning efficiency, the process flow with disassembly and cleaning can be adopted.

image005.jpg


Hot Tags: tattoo ultrasonic cleaner, China, suppliers, manufacturers, factory, wholesale, price
Related Products
Inquiry

INFORMATION

  • >Delivery information
  • >Discout
  • >Sitemap
  • >Privacy Policy
  • >FAQs
  • >Terms&Condition

SERVICE

  • >Account
  • >Wishlist
  • >Shopping Cart
  • >Return Policy
  • >Special
  • >Lookbook

Remark:

.

SUBMIT

.