DPF Ultrasonic Cleaner With Filter System

100% brand new and high quality!
Stainless steel tank has resistance to wear and long work life.
Free setting from 1 min to 99mins.
0~95℃ temperature range.
With Stainless steel basket

Product Details

DPF Ultrasonic Cleaner With Filter System


100% brand new and high quality!

Stainless steel tank has resistance to wear and long work life.

Free setting from 1 min to 99mins.

0~95℃ temperature range.

With Stainless steel basket

Industrial trade power cord, more safer

With drainage

With the filter system save detergent, more environmentally friendly

Use just tab water, or industrial alcohol and solvent cleaner for more higher cleaning requirement 


Model: JP-120G

Quantity of transducers: 12 pcs

Ultrasonic Power: 600W

Ultrasonic Frequency:  40KHz

Heating Power: 1500W

Tank Capacity: 38L  

Voltage: AC 220~240V, 50Hz/60Hz;

              AC 100~120V, 50Hz/60Hz

Cleaning Basket: Yes

Time Range(Min): 1~99 minutes

Temperature Range(℃): 0~95

Tank Material: Stainless Steel

Tank Size: 19.69"L x 11.81"W x 9.84"H ; 500*300*250(L*W*H)



Tank capacity


Tank size(mm)



AC 220~240V, 50Hz/60Hz

AC 100~120V, 50Hz/60Hz

Ultrasonic power


Heating power



1~99min adjustable


0 ~ 95℃ adjust



Oil skimmer

Yes, with circulationg pump, filter

Package included:

1 x Industry Heated Ultrasonic Cleaner Set

1 x sus basket

1 x Power Lead

1 x English instruction Manual




More Related Applications:
1. Removal of the rust-proof grease; Cleaning of measuring tools; Oil removal and rust removal of mechanical parts; Cleaning of engines, carburetors and automobile parts; Filter, filter mesh dredge cleaning.

2. Medical equipment cleaning/ disinfection/ sterilization; test utensils cleaning

3. Remove oil and rust before plating; Cleaning before ion plating; Phosphating; Removal of carbon deposits; Removing oxide skins;Remove polishing paste; Metal workpiece surface activation treatment

4. Industrial ultrasonic cleaner machine for cleaning electronic parts: ultrasonic PCB cleaner for cleaning circuit board

Why does us need to clean the cylinder?

Cylinder head is a very important part of diesel engine,It has a very complex structure of water channel, oil channel and gas channel.Its inner cavity is curved, narrow and often has dead angle with cast sand, graphite powder or other dirt, and it is difficult to remove all the shot blasting and sandblasting.

Common Cleaning methods

Cylinder head cleaning mainly has high - pressure jet cleaning and manual immersion scrub technology. The most widely used and most mature technology is high pressure jet cleaning with chemical cleaning agent. Manual scrubbing must be added for difficult parts of cylinder head, such as inlet and tappet chamber.These parts are usually washed repeatedly by the worker with a nylon or wire brush, while the water pipe is used to flush the cleaning part. When the engine is repaired or remanufactured, due to the limitation of conditions, it is usually soaked in diesel oil or kerosene and then washed manually.However, these cleaning techniques are more or less inadequately:

(1)  Although high pressure jet cleaning technology is supplemented by chemical dissolution, it mainly relies on mechanical washing, so the removal effect of oil pollution is not ideal, and it is almost impossible to wash the corner, dead angle and inner cavity of cylinder head.

(2)  High - voltage jet cleaning generally requires high - power motor drive and electric heating.

(3)The manual cleaning process works well, but it is inefficient and labor intensive.

Immersed diesel fuel (kerosene) has good cleaning effect, but the cost is too high, and oil and gas volatilization will damage the health of cleaning personnel.

Ultrasonic cleaning technology

Ultrasonic cleaning technology has a strong degreasing effect. In theory, ultrasonic cleaning can be carried out as long as the cleaning solution can be soaked in place, so it is especially suitable for parts with complex surface shapes.

Ultrasonic cleaning principle: by signal generator and function of the ultrasonic transducer, by way of longitudinal wave propagation in cleaning fluid, in the spread on the way because of "cavitation effect", a series of small explosions and release energy, to impact of workpiece surface continuously, make a crack in the surface and dirt quickly peeling, to purify the effect on the surface of the workpiece.

Compared with high pressure jet cleaning technology, ultrasonic cleaning technology saves electricity and water

What You Get For Your Money?

CE, FCC and RoHS Approved

Power cord , basket and user manual

Perfect for cleaning the longhole, finedraw and shelter of piece part or workpiece, no need to touch cleaning fluid by your hands

Stainless steel tight fitting lid with handle

Skid proof rubber feet

Drain valve

Use only tap water for general cleaning, you also can add about 5-10ml of detergent into water to enhance wash result when needed

Please read the instruction manual before use

Hot Tags: dpf ultrasonic cleaner with filter system, China, suppliers, manufacturers, factory, wholesale, price
Related Products


  • >Delivery information
  • >Discout
  • >Sitemap
  • >Privacy Policy
  • >FAQs
  • >Terms&Condition


  • >Account
  • >Wishlist
  • >Shopping Cart
  • >Return Policy
  • >Special
  • >Lookbook